Precautions For Cooked Vacuum Packaging Machine You Have To Look

- Nov 06, 2018-

Vacuum packaging machine is an advanced equipment commonly used in food processing industry. The main models are platform type double chamber vacuum packaging machine, continuous vacuum packaging machine, fully automatic stretch film vacuum packaging machine, which can be applied to food, fruits and vegetables. Seafood, frozen meat, soy products, metal fruits, vegetables, pickles, food, fresh meat, meat products, condiments, tea, coffee, native products, Chinese herbal medicines, chemicals, electronic components, textile machinery parts, precision instruments, instruments Etc. Whether it is solid, powder, paste or liquid juice can be packaged, concave waterproof vacuum packaging machine is more suitable for liquid juice items.

    The following are the considerations and recommendations of the cooked vacuum packaging machine during use, for your reference during use;

    1, vacuum packaging machine should be at -10 ° C -50 ° C temperature, relative humidity is less than 85%, the surrounding air is non-corrosive gas, no dust, no explosive environment.

    2. The vacuum pump motor is not allowed to reverse when the vacuum packaging machine is running. Always check the oil level, 1 / 2-3 / 4 of the normal oil level of the oil window (cannot be exceeded), when the vacuum pump is black in water or oil, then you should replace it with new oil (usually replace one or two continuously) For months, use 1# vacuum gasoline or 30# gasoline, oil can be).

    3, the impurity filter should be cleaned once every 1-2 months, if there is packaging debris should shorten the cleaning time.

    4. Regularly open the back cover to add lubricating oil to the sliding part (usually working for 2-3 months), and use the lubricating oil on the switch touch panel to connect the heating rod according to the usage.

    5, decompression, filtration, oil mist triple sheet 24 should be checked frequently to ensure oil mist, oil cup oil (sewing machine oil), filter bowl water.

    6. When heating, the silicone strip should be kept clean and no foreign matter should be adhered to avoid affecting the quality of the seal.

    7, heating rod, the second layer of adhesive under the heating plate for insulation, should be replaced in time to avoid short circuit.

    8, user-supplied work and inflatable gas source, the working pressure should be set at the appropriate index position, vacuum packaging machine in the absence of special circumstances, do not adjust too much.

    9, vacuum packaging machine does not allow tilting and impact during processing, but can not be tilted.

    10. The vacuum packaging machine must be installed on a reliable grounding device.

    11, it is forbidden to put your hand under the heating rod to prevent injury, and immediately cut off the power in case of emergency.

    12, ventilation after power-on, first power off after shutdown.