Pay Attention To The Daily Maintenance Of The Feed Packaging Machine

- Jun 15, 2018-


The fodder packing machine, like other feed machines, needs to be maintained in time to ensure the quality of the processing and to prolong its service life. In a simple way, the feed packer needs to work in a dry and clean environment, avoiding the packing machine working in the acid air and the corrosive gas environment. When the use is finished or stop using, we should clean the rotary drum and the remaining material in the cleaning bucket in time, then install it well and prepare for second days' work. When the drum moves in the process of working, please adjust the M10 screw to the proper position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the gap to make the bearing do not sound, the hand turn the belt wheel, and the loose fitting is appropriate, too tight or too loose can cause the machine itself to have different degree of damage.

In addition, the feed packaging machine also needs to check the machine parts regularly, once a month to check the worm, worm, bolts, bearings, bearings and other active parts of the flexible and wear conditions, found that defects should be repaired in time, must not be used reluctantly; if the feed packaging machine is not used for a long time, then the packaging machine needs to be packed. Wash and clean the rust on the smooth surface of the equipment, then cover it with cloth.