Vacuum packaging machine is suitable for all kinds of plastic composite film bags or aluminum foil composite film bags, for all kinds of raw and cooked food, fruit, native products, medicinal materials, chemicals, precision instruments, clothing, hardware products, electronic components and other solid , powdered objects, liquids are vacuum packed. So what needs to be prepared or paid attention to in the process of using the vacuum packaging machine?
First, the preparation before use:
1. The vacuum packaging machine is placed in a stable manner to check if the cover is covered smoothly and it will automatically jump after being released.
2. Equipped with a power supply that meets the requirements of the model.
3, check the position of the vacuum packaging machine vacuum pump oil surface is correct, if not correct should be adjusted (see vacuum pump instructions).
4, the machine is well grounded.
5. Turn on the power, turn on the power switch, close the lid, and check if the vacuum pump is operating normally.
Second, the adjustment before use
1, select the degree of vacuum
Vacuum packing machine pumping time, digital display, continuous adjustable, small vacuum packaging machine pumping time is digital rotary type 0-30 seconds adjustable. Adjust the length of the pumping time so that the desired degree of vacuum is achieved.
2, select the heating temperature
Select the required heating temperature according to the material of the packaging bag and adjust the heating temperature knob to the corresponding position.
3, adjust the heating time
Heating time, digital display, continuous adjustable, according to the packaging materials used and the heating temperature, adjust the heating time knob, select the appropriate heating time.
4, according to the need to select the sealing silicone rubber silicone word, set the sealing date and other characters.
Third, when using the precautions
1. Turn on the power switch.
2. Open the packing bag trimmer and place the packaged bag into the working room. Place the sealing place on the silicone rubber strip. Place the bag over the silicone rubber strip. Do not overlap the bag. Push the bag over the bag to press the mouth of the bag. it is good.
3, (or press the edge of the cover) press down on the studio, cover, the machine will automatically complete the vacuum packaging process according to the procedure and automatically open the cover, some equipment is equipped with emergency stop switch.
4, open the vacuum cover, remove the bag, that is to complete a work cycle.
5. When you stop working, you need to turn off the power switch and pull out the power plug.