How To Maintain The Packaging Machinery

- Aug 25, 2018 -

There are several procedures that must be carried out for the daily maintenance of packaging machinery. They are the cleaning, fastening, adjustment, lubrication and anti-corrosion work of the equipment. In the normal production process, the machine maintainer should: according to the maintenance manual and maintenance procedures of the machine packaging equipment, strictly carry out various maintenance work within the specified period, reduce the wear speed of the parts, eliminate the hidden troubles, and extend the machine. The service life.

Maintenance of packaging machinery and equipment: routine maintenance, regular maintenance and special maintenance. Regular maintenance can be divided into three types: first-grade maintenance, second-level maintenance and three-level maintenance. Special maintenance can be divided into season maintenance and deactivation maintenance. The following article will introduce the specific procedures and precautions for these types of maintenance work.

Routine maintenance of packaging machinery and equipment is focused on cleaning, lubrication, inspection and fastening. Routine maintenance should be carried out as required during and after the work of the machine.

The primary maintenance work is carried out on the basis of routine maintenance. The key tasks are to lubricate, tighten and inspect all relevant parts and their cleaning work.

The secondary maintenance work focuses on inspection and adjustment. Specifically check the engine, clutch, transmission, transmission components, steering and brake components.

The third-level maintenance focus is to detect, adjust, troubleshoot and balance the wear of each component. Diagnose and condition check the parts that affect the performance of the equipment and the parts with fault signs, and then complete the necessary replacement, adjustment and troubleshooting.

Seasonal maintenance means that the packaging machinery and equipment should focus on the power system (engine), the conveyor system (spiral shaft and belt conveyor), the air pressure system (check the lubrication and sealing of the air compressor), and the control system before entering the summer and winter. (The maintenance of the special electromechanical control cabinet, this part needs to be completed under the guidance of the engineer after the sale of the engineer) and other components of the detection and repair.

Discontinued maintenance means that when the packaging machinery and equipment need to be deactivated for a period of time due to seasonal factors (such as winter vacation), it should be clean, cosmetic, supporting, moisture-proof, anti-corrosive, etc.