How Automatic Filling Machine Operates And Maintains

- Jun 29, 2018-


I. Adjustment of Filling Accuracy of Automatic Filling Machine

1. The filling error is mainly determined by the filling volume, the filling speed, and the switching speed of the upper and lower valves. The switching speed of the upper and lower valves is related to the viscosity of the product. The higher the viscosity, the slower the switching speed of the valve.

2. The switching speed of the condensing valve mainly adjusts the spring pressure of the valve. As the spring pressure increases, the valve's switching speed increases.

3. The adjustment of the spring pressure of the valve shall be determined by testing the filling metering and operating personnel's experience.

 Second, automatic filling machine safe use of automatic filling machine for the double head liquid filling machine, work items for the liquid, can not be used for other purposes. To ensure the safety of production, note the following:

1. This machine is set without power, normal gas source is 4-6kg.

2. If overflow phenomenon occurs in the injection nozzle, press emergency stop switch to ensure that the workshop is neat.

3. Do not wash the machine directly with water when washing the machine.

4. The local circuit is simple and must not be arbitrarily inserted and inserted.

5. When the cylinder ejection fails to return due to improper operation, press this button to reset it.

Third, automatic filling machine equipment maintenance

1. Automatic Filling Machine The machine body is stainless steel shell, do not use a sharp, hard weapon to scrape the surface.

2. The cylinder has been lubricated at the factory. Do not open or add any lubricant.

3. Before the piston filling machine is cleaned, the remaining product should be removed and the tank filled with a mild cleaning solution. Warm water is recommended. Use soapy water, alcohol, or other cleaning fluid if needed.

4. At the same time when removing the piston and removing the fixing screws, to avoid affecting the other process requirements when the first one is removed.